Click Ethernet and select Configure IPv4 as Using DHCP. Connect your MAC PC to your router with wire or wireless.Ĭlick Apple icon, go to System Preferences-> Network. Step 4 Connect the printer to Print Server and Print Server to one LAN port of your router. Note: The TL-PS110U is produced without password by default.

Then please go to Setup-> TCP/IP page, change the IP to 192.168.1.10 and click Save & Restart button. Step 3 Open the Safari and type in the address bar. Step 2 Go to Ethernet, Advanced, select Manually on Configure IPv4 field and set the IP address & Subnet Mask like the following. On your MAC PC, click Apple icon and go to System Preferences. Step 1 Connect your MAC PC to the print server with an Ethernet cable directly. In this guidance, 192.168.1.1 is assumed as the IP of the router. If your router’s IP is 192.168.0.x (x is between 1~254), you can skip to step 4. Normally, it’s the gateway of your computer. Before doing the settings, please prepare the IP of the router.

The Default IP of the print server is 192.168.0.10. System Information: Mac OS X EI, Version 10.11.5īelow is a topology of normal network and taken as example in this guidance. Note: TL-PS110U is used for demonstration in this article.

How to set up printer mac